Frequent Snow Blower Issues – Pt. 3: Snow Blower Received’t Throw Snow


Winter’s right here and for those who’ve been following the climate experiences, a lot of the United States has already suffered some type of extreme winter climate. So, clearly, days like that make your snow blower the preferred equipment within the house.

In latest weeks we’ve got been discussing widespread snow blower issues. In Pt. 1 we described how you can clear the carburetor of a blower. In Pt. 2 we mentioned how you can deal with a fuel leak.

On this article we’ll cowl what prevents a snow blower from throwing snow.

The principle cause why a snow blower doesn’t throw snow is that the chute or auger is filled with an excessive amount of snow. If you end up blowing moist and heavy snow, the buildup can worsen.

Ought to this happen, it’s suggested that you just flip off the blower and come up with a snow blower clear out instrument to take away the packed snow. Even after assuring that the machine is shut off, it’s nonetheless important that you just stay cautious when cleansing out the chute and auger. It’s suggested that you just don’t use your arms to filter the snow. As an alternative, there’s a so-called snow blower security instrument accessible from Amazon that may function the perfect methodology to take care of packed snow within the blower.

Different points that might happen that may forestall a blower from throwing snow embrace:

• A broken or frozen impeller

• A broken auger or free belt

If after you filter the packed snow out of your blower, it nonetheless doesn’t throw snow, then you definately’ll must verify the impeller, auger, and belt.

Broken Or Frozen Impeller

Two-stage and three-stage snow blowers function an impeller that thrusts snow out the chute. Examine the impeller to guarantee that it isn’t damaged and that it strikes freely. One other situation to think about when trying out the impeller is whether or not or not it’s frozen. An impeller can freeze on account of moisture buildup. When temperatures drop under freezing (32°F), the water can freeze rendering the impeller ineffective. This could happen when residual snow within the discharge chute and drum melts on account of warmth coming from the engine. The water drips onto the freezing ground of the impeller drum and there it freezes. The frozen water swimming pools and fuses the impeller to the drum of the blower.

Earlier than utilizing the blower, it’s recommended that you just manually spin the impeller earlier than beginning the machine to make sure that it strikes freely. If it doesn’t, then use a hairdryer to soften the snow.

One other method to deal with the problem is to position boards or different secure materials beneath the again tires of the blower. This permits melted liquid to empty towards the entrance of the machine.

Subsequent, take a number of buckets of pretty sizzling water and pour them down the chute over the again of the impeller/blower fan. It will soften any ice build-up on the bottom of the impeller in addition to the housing.

To stop the impeller from freezing when storing the blower in a chilly setting, comply with these 5 steps:

1. Run the auger and impeller of the blower for a couple of minutes after you’ve got used it to clear snow.

2. Shut off the blower and dirt off any remaining snow.

3. Manually spin the impeller in order that the blades don’t level straight down.

4. Place a heat-source like a hairdryer or an incandescent mild bulb within the housing.

5. Cowl the blower with a tarp to retain the warmth and to maintain snow from accumulating on the machine or retailer in a heat dry location.

Toro Snow Blower
Photograph courtesy of Toro. Bahrns Gear is a licensed Toro Seller.

Broken Auger Or Free Belt

One more reason why a blower received’t throw snow is that the belt is free. This prevents it from spinning quick sufficient to throw snow. Tighten the belt if that is the problem. It’s also recommended that you just examine the auger for any injury that might forestall it from choosing up snow. In the event you uncover that it’s broken, substitute with a brand new auger.

(Supply: poweredoutdoors.com and transnorth.ca)



Leave a Reply

Your email address will not be published. Required fields are marked *