How A lot Do SIP Panels Price in 2023?

The nationwide common SIP panel price is round $9.70 per sq. foot or round $310 per panel. Nonetheless, the ultimate worth can differ drastically relying on the panel’s measurement, insulation worth, and software. On common, SIPs vary in price from about $280 all the best way as much as $550 per panel or between $7 and $12 per sq. foot

Should you’re searching for a extra reasonably priced choice on your shed or storage, you could find SIPs for as little as $6 per sq. foot, although they could not have the identical stage of insulation. On the opposite finish of the worth spectrum, there are panels with additional insulation and particular shapes or sizes that may price as a lot as $20 per sq. foot or extra

SIP stands for Structural Insulated Panel, and these panels are composed of an insulating foam core sandwiched between two structural skins of oriented strand board (OSB). They supply a really excessive R-value per inch in comparison with different types of insulation, making them power environment friendly and environmentally pleasant.

On this web page:

Common SIP Set up Prices in 2023

Nationwide Common Price $9.70 per sq. ft.
Typical Worth Vary $7 – $12 per sq. ft.
Excessive Low-Finish Price $6 per sq. ft.
Excessive Excessive-Finish Price $20 per sq. ft.

In terms of the price of SIP panels, it’s a bit laborious to provide an actual worth with out taking into consideration the specifics. Usually talking, you may count on to pay round $310 on nationwide common for the panel itself.

This price might differ relying on a number of elements, resembling:

  • Panel measurement
  • Panel thickness
  • R-Worth (thermal resistance) of the panel
  • High quality and sort of insulation supplies used
  • Producer
  • Labor and set up prices

Sometimes, the price of SIPs will vary from round $280 to $550 for a panel of ordinary measurement and insulation worth. Which means that the worth per sq. foot can vary from round $7 to $12 per sq. foot or extra, relying on the specifics of your venture.

As an illustration, an 8′ x 24′ panel with 12.25-inch thickness and an R-Worth of 48 might price you as much as $2,900 or $20 per sq.ft., whereas a 4′ x 8′ panel with 4.6-inch thickness and an R-Worth of 16 may solely be $240 or round $6 per sq. ft. on common.

Since SIPs are often manufactured off-site and pre-cut, they are often assembled shortly, and labor prices are typically decrease than conventional insulation strategies. Shopping for in bulk can also be an effective way to economize, as many producers supply reductions for bigger orders.

Price Estimator by SIP Panel Dimension

SIPs are available in varied sizes, often between 4′ x 8′ to eight′ x 24′. Usually, the larger your panel measurement, the pricier it’s. On common, you may count on to pay wherever from $7 to $12 per sq. foot for the panel alone, not together with extra supplies, labor, or set up charges. 

If you’re going for a 4′ x 8′ panel, you may anticipate spending between $224 and $385. Bigger measurement panels such because the 8′ x 24′ may cost a little you as much as $2,200. Here’s a price estimator primarily based on panel measurement to provide you an thought of bills.

Panel Dimension Typical Price Vary (Supplies Solely)
4′ x 8′ $224 – $385
4′ x 10’ $280 – $480
4′ x 12′  $336 – $576
4′ x 16′  $448 – $768
4′ x 24′ $672 – $1,152
8′ x 24′ $1,344 – $2,300

Different Elements That Have an effect on Price

SIPs are recognized for having improved energy and insulation, which saves cash in the long term. Nonetheless, in relation to price, a number of elements can have an effect on the general worth of a SIP panel venture, together with the thickness and R-Worth of the panel.

Price by R-Worth of SIPs

The R-Worth of every SIP panel determines how a lot insulation it gives and is correlated to the panel’s thickness and the fabric used. The most well-liked insulation used for SIPs is expanded polystyrene inflexible foam (EPS), which has an R-Worth of about 3.6 per inch of thickness.

Alternatively, polyurethane has a a lot larger R-Worth of 6.8 per inch and is a perfect choice in case your price range permits it. SIPs vary in thickness from 4.6 inches to 12.25 inches, with whole R-Values starting from 16 to 48.

Usually, a 4′ x 8′ panel with an R-value of 16 might price as much as $240, whereas a 48 R-Worth panel might price as much as $290 on common. Costs improve by about 5% for each 8 factors of R-Worth and every inch of thickness. So, the upper the R-Worth or the thicker the panel is, the extra you may count on to pay. 

With this in thoughts, here’s a breakdown of the common price of 4′ x 8′ panels with completely different insulation ranges:

Panel Thickness(Inches) R-Worth Common Price Per Sq. Foot Common Price Per 4′ x 8′ Panel
4.6” 16 $7.50  per sq. ft. $240/panel
6.5” 24 $7.87 per sq. ft. $252/panel
8.2” 32 $8.26 per sq. ft. $263/panel
10.2” 40 $8.67 per sq. ft. $276/panel
12.25” 48 $9.10 per sq. ft. $290/panel

Usually talking, when choosing SIP panels for a venture, investing in higher-quality materials that provides better insulation is worth it. That manner, it would assist cut back heating and cooling prices down the street.

SIP Price By Home Dimension

The scale of your house is immediately associated to the price of your SIP set up. Extra panels might be wanted for a bigger, multi-story residence, rising the worth.

The price of R-16 insulation SIPs will sometimes vary between $7 and $12 per sq. foot, relying on the panel measurement. A house owner with a 2,000 sq. ft. residence with out a truss timber body can count on to speculate someplace between $14,000 and $24,000 on the panels alone.

In an identical method, R-30 SIPs for the roof might price round $8.26 per sq. foot or $826 per roof sq. (100 sq. ft). You’ll doubtless require about 20 roofing squares for a 2,000 sq. ft. home, bringing your roof prices alone to roughly $16,500, with out skilled set up.

Here’s a breakdown of SIP prices for a number of residence sizes: 

Dwelling Dimension(Sq. Footage) Common Price for Wall Panels Common Price for Roof Panels Whole Price (Supplies Solely)
1,800 sq. ft. $12,600 – $21,600 $14,870 $27,470 – $36,470
2,000 sq. ft. $14,000 – $24,000  $16,500 $30,500 – $40,500
2,200 sq. ft.  $15,400 – $26,000 $18,170 $22,570 – $44,170

*Notice: In accordance with, for optimum efficiency, a SIP venture ought to use insulation panels with an R-value of at the very least R-16 for the partitions and R-30 for the roof. For a higher-performance SIP home, an R-value of R-21 for partitions and R-50 for the attic is beneficial.

It’s vital to keep in mind that these are solely tough estimates of the price of SIPs for various residence sizes. Elements resembling the dimensions and configuration of your home, in addition to native local weather situations, might trigger the precise price to differ considerably. 

To get an correct estimate, it’s finest to seek the advice of knowledgeable contractor or residence builder, somebody with expertise in SIP development, who will think about all these issues.

SIP Materials Kind

On common, the costs of SIPs vary from $7 to $12 per sq. foot, relying on a number of elements, together with the fabric and insulation kind used. SIP panels are often created from OSB (Oriented Strand Board) and inflexible insulation materials. They’re sometimes used to create high-performance partitions, roofs, or flooring.


The OSB used for SIP panels, additionally known as insulated panel pores and skin, is without doubt one of the hottest elements within the business on account of its sturdiness and power effectivity. The oriented strand boards are fabricated from wooden strands which have been chemically glued and compressed collectively to create a powerful, light-weight materials. 

SIPs Inflexible Insulation Materials

Relating to inflexible insulation materials, polystyrene foam is probably the most broadly used. This foam is sometimes called EPS (Expanded Polystyrene).

EPS is a superb selection for insulation, offering a strong barrier with a excessive R-Worth. Nonetheless, in case you’re searching for even higher insulation, polyurethane foam (PUR) is the best way to go. Polyurethane foam is costlier than EPS however provides a better R-Worth. 

Different insulation supplies that can be utilized with SIP panels are:

  • Polyisocyanurate
  • Magnesium oxide
  • Graphite

Labor Prices

SIPs have gotten more and more well-liked for residence development and renovations, given their quick set up time, which reduces labor prices. Framing a house with SIPs takes round every week, whereas conventional stick framing can take for much longer.

Because the SIP panels are assembled in a manufacturing facility, a lot much less labor is required on-site throughout set up. Putting in them can considerably cut back whole development time, leading to financial savings on labor prices. In comparison with different constructing strategies, a house owner can save as much as 55% when utilizing SIPs.

A carpenter and crew would sometimes cost an hourly charge to put in SIPs, however elements such because the regional price of labor, complexity of the construction, provides, and instruments wanted can affect that fee. Usually, foundations, roofing, and home windows would be the most costly elements to put in. On common, a carpenter will cost wherever from $50 to 100 per hour.

Associated Providers

Along with the price of SIPs, it’s possible you’ll want different providers like plumbing and electrical work on your constructing. When you can deal with a few of the duties your self, chances are high you’re going to want knowledgeable.

Moreover, you may need to put money into extra energy-efficient measures like insulation, HVAC methods, or photo voltaic panels. 

Electrical Wiring 

In case your new SIP constructing requires electrical wiring, you’ll need to rent an skilled electrician. They might help you design a cost-efficient setup from begin to end. They’ll additionally guarantee your constructing is up-to-date with the most recent security and code necessities. 

On common, an electrician will cost between $50 and $100 per hour. Should you’re putting in a fancy system, get an estimate earlier than the venture begins so that you gained’t be confronted with a bigger invoice than anticipated. 

Plumbing Service

One other expense you must contemplate is plumbing providers. As an illustration, it’s possible you’ll want to put in a brand new sink, bathroom, or bathtub in your SIP constructing. It’s important to make use of an insured and skilled plumber to make sure the job is finished accurately. Plus, this skilled might help you choose the very best fixtures on your constructing’s wants. 

Plumbers sometimes cost between $45 and $150 per hour

Different Insulation Choices 

Moreover SIP panels, there are different methods to make your constructing energy-efficient. For instance, it’s possible you’ll need to add insulation to current partitions or attic house. Not solely will new insulation cut back your utility payments, however it would enhance the consolation of your constructing, too. 

The price of insulation relies on a number of elements, resembling the kind of insulation you select and the labor required to put in it. Usually, skilled set up will price between $1 and $5.65 per sq. foot, on common. 

HVAC System Set up 

In terms of a SIP residence venture, you may additionally need to put money into a heating and cooling system. SIPs are high-performance partitions, and they’re wonderful at retaining the temperature in your constructing. Subsequently, there isn’t a must have a big or costly HVAC system. 

The worth of an HVAC set up can vary from $5,000 to $9,000, together with the unit and labor charges. 

Photo voltaic Panels 

Should you’re seeking to cut back your power invoice even additional, you can too set up photo voltaic panels. This clear power supply permits you to produce electrical energy at a decrease price, in some circumstances lowering your power prices by as much as 90%. The value of a photo voltaic panel system will rely on the dimensions and sort of system you select. 

On common, a residential photo voltaic panel system will price wherever from $15,000 to $26,000 in whole.

DIY Price vs. Professional Price

Professional Price $13,800 to $17,000
DIY Price $12,850

If you wish to save your self some cash, you may all the time tackle the duty of putting in SIP panels your self. However be warned, whereas it’s a comparatively easy course of, there are some technical facets. It’s not beneficial that you simply take this on except you’re fairly useful and assured with DIY tasks.

For greater SIP tasks, resembling whole home installations, it’s most likely finest to seek the advice of knowledgeable. They’ll have the ability to advise you on the best supplies, acceptable website preparation, and the best design. Nonetheless, in case you’re simply seeking to get just a few panels up as an addition, then learn on.

Often, the SIPs include pre-installed connectors and different equipment that may assist make DIY set up simpler. For an 800 sq. ft. addition, you may simply DIY for about $12,850 on common. This may embody the price of panels, supporting supplies, instruments, and different provides. Here’s a fundamental breakdown of prices:

Merchandise Common Price
SIP Wall Panels  $7 per sq. ft. / $5,600 for 800 sq. ft.
SIP Roof Panels $8.26 per sq. ft. / $6,600 for 800 sq. ft.
Round Noticed $58
Hand noticed $10
Stage $35
Sq. $13
Hammer $18
Chisel/Stanley Knife $15
Drill $120
Tape Measure $18
Ratchet Straps $33
Pipe Clamps $35
1-1/2″ Wooden Bit $35
Panel Lifting Tools $200
Protecting Gloves $18
Security Goggles $14
Exhausting Hat $25

*Notice: It’s important to learn the producer’s directions rigorously, as mistaken installations can result in harm and even additional prices down the street. Moreover, you may void the guarantee if one thing goes mistaken. 

When deciding whether or not you must DIY or rent a professional on your SIPs set up, the fee usually performs a major function. Skilled set up for an 800 sq. ft. constructing takes round 2 to three days and may vary from $13,800 to $17,000 on common. That’s roughly just a few thousand {dollars} greater than the DIY choice.

Nonetheless, in case you don’t have the boldness or time to take this on your self, hiring a professional is a superb choice, particularly in case you want a bigger construction. The fee could also be extra, however it would prevent time and trouble in the long term.

SIP Set up Price by Location

The nationwide common set up price of SIP panels is round $7 to $12 per sq. foot, just for the panels. Nonetheless, this may differ considerably relying on the placement. Relying on the place you’re, the costs can differ on account of availability and labor prices.

Furthermore, completely different climates might affect the kind of SIPs it’s worthwhile to set up. As an illustration, in colder climates, better-insulated SIPs are essential to maintain the insulation and working temperature up. That may drive the fee up since all these panels are costlier.

Contact a neighborhood insulation professional skilled with SIP set up to get an correct quote on your venture.

Professionals and Cons of SIPs

SIP panels include a number of professionals and cons. On the upside, they’re light-weight, energy-efficient, and strong buildings. They’re additionally comparatively simple to put in since they arrive pre-fabricated, saving you money and time. On the draw back, they are typically costlier than conventional development supplies.

The next desk highlights the professionals and cons of utilizing SIPs for insulating your house:

Professionals Cons
✔ Supply superior structural energy 
✔ Present tremendous insulation to maintain within the warmth/cool air, that means much less power is required for HVAC methods
✔ Supply a good seal with fewer joints to scale back air loss and improve air high quality
✔ Could be tailored to any local weather(examined in excessive temperatures)
✔ Straightforward to connect inside and exterior finishings 
✔ Lengthy-lasting sturdiness (last as long as 60 years if saved in dry situations)
✔ Simpler and sooner to put in than different constructing supplies, chopping down on labor prices
✔ Preserve pests at bay with their foam core development
✔ Sustainable, as they’ve off-site fabrication & no waste on-site
✔ Environmentally pleasant constructing answer
✘ Vulnerable to moisture harm 
✘ Restricted room for enhancements
✘ Tough to seek out skilled contractors 
✘ Necessitates extra air flow methods to keep away from condensation and air stagnation
✘ Requires added insulation for an hermetic seal
✘ Electrical wiring and plumbing installations current additional challenges
✘ Excessive preliminary price
✘ Lack of wall studs to connect heavy equipment
✘ Not appropriate for flood zones or below-ground ranges
✘ Should make sure the integrity of the bond between foam and board
✘ Costly materials prices, requiring a better upfront funding


1) Do SIPs want air flow? 

Sure, they do want air flow. SIP panels are hermetic, so it’s important to arrange a correct air flow system. This enables air to flow into and regulate the temperature over time. 

2) What’s the function of SIPs?

The aim of SIPs is to offer a excessive stage of insulation, energy, and air-sealing. The interlocking SIP panels create a sturdy constructing envelope, making your house extra air-tight, energy-efficient, and structurally sound.

3) Can SIPs get moist?

Sure, SIPs can get moist, however they shouldn’t be saturated with water. If there’s a leak or an space that always will get moist, you must take fast steps to establish the reason for the leak and restore it as quickly as doable.

4) What are the disadvantages of SIPs?

The first drawback of SIPs is the fee. Whereas they provide many benefits, their upfront prices may be comparatively excessive in comparison with conventional development. As well as, modifications to the panels may be tough as soon as they’re put in. Chances are you’ll want knowledgeable for any important alteration or set up.

5) How lengthy will SIPs final?

SIPs are designed to final, with life cycles of as much as 60 years or extra. With good upkeep and correct set up, the lifespan of SIPs can exceed expectations.

6) Can SIPs be used as a flooring?

Sure, SIPs can be utilized as a flooring in sure situations. The panels should be rated for flooring functions and are sometimes structurally strengthened with extra supplies. Plus, you have to guarantee the ground space is stage, and the SIPs are accurately positioned and secured beneath flooring joists.

7) Are SIPs fireproof?

SIPs are constructed from polyurethane foam and usually are not technically fireproof. Nonetheless, SIPs present a superb diploma of safety from the warmth and unfold of fireplace. A SIP wall can considerably cut back the unfold of fireplace in comparison with a conventional wood construction, making them a wonderful selection for hearth security in houses.

Ultimate Ideas

Usually, SIPs can vary from $7 to $12 per sq. foot, relying on the kind of supplies used and the insulation desired. With SIPs, it can save you cash on power payments, enhance indoor air high quality, and make your house extra comfy.

Moreover, SIPs supply an environment friendly answer for constructing with minimal waste, making them an excellent choice for environmentally aware owners. For an correct set up price, it’s best to seek the advice of a neighborhood skilled and talk about your venture intimately.

Notice: LawnStarter might get a referral charge for matching you with contractors in your space.

Important Picture Credit score: brizmaker / Canva Professional / License

Luminita Toma

Luminita Toma

Luminita Toma is a contract author and HR specialist from Romania. She holds a Bachelor’s Diploma in Fashionable Languages, majoring in English and Japanese. After gaining expertise in several industries, Luminita determined to make a profession change and turn into a contract author. Presently, she focuses on writing articles about garden care and gardening. In her spare time, she enjoys exercising her Japanese language expertise, spending time in nature, and exploring new locations.

Leave a Reply

Your email address will not be published. Required fields are marked *